Concrete cutting in Castro Valley CA - clean cuts right where you need them
Need a trench for a new drain line or a cracked section cut out? We make straight, clean cuts and say up front what's included.
Do you need concrete cut, or cut and hauled away?
Concrete cutting in Castro Valley means sawing clean, straight lines through a slab or wall, or core drilling round holes. That lets a pipe, a drain, a doorway or a new section of concrete go in without breaking up everything around it.
Most calls start with concrete in the way. It might be a cracked stretch of driveway that has to come out before a new driveway goes in, a garage floor that needs a trench for plumbing, or a wall that needs a doorway. The price turns on how thick the concrete is, how much steel is inside it, whether it's a slab or a wall, and whether you want the pieces broken up and hauled off too. The schedule turns on how easy the spot is to reach and whether the job needs a permit. We check with the county early, so that's settled before the crew is booked. The estimate I write after walking the job gives you your own price and lists what's included.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
Concrete cutting, driveways and patio work
What our concrete cutting work involves
I'll ask what you're cutting, where it sits and whether you want the pieces hauled off, because cutting and removal are two different jobs. You'll know which one we're doing before we start. The surface and how we can reach it decide the saw. A flat saw rides across slabs like driveways and garage floors, a track-mounted wall saw cuts walls, a hand saw gets into tight corners, and a wire saw handles thick or heavily reinforced sections. Round holes for pipes and conduit get core drilled. Some slabs are structural or post-tensioned, which means steel cables are pulled tight inside them. On those, the slab may need scanning before any cut to find the rebar, the steel bars that hold it together, plus the cables and any pipes buried in it, so ask any cutter how they'll handle that, us included. Then our crew marks the lines, makes the cuts and cleans up, and either leaves the pieces in place or takes them out, whichever we agreed on.
Cutting is often the first step of a bigger job. When a section of driveway has cracked or sunk, we cut it out on clean lines so the new concrete driveway meets the old slab at a straight edge. The same goes when you're running a drain under a yard or adding on with concrete patio construction. If we're pouring new concrete, I'd rather you spend on the subgrade, the packed ground the slab sits on, than on a fancier finish. Nobody sees the base on day one, but a base that was only raked level settles with the dirt and cracks the slab right back open.
Why homeowners call P&J Castro Valley Concrete Company for cutting
I walk every job myself
I come out, look at the concrete and write the estimate myself, and our crew lead runs the cut with our own crew. You won't get handed off to someone who never saw your slab.
In business since 2017
I spent years scheduling crews, pumps and concrete deliveries and learned the trade from the finishers before I started this business in 2017. That background is why the order of work is set before anyone shows up.
Licensed and insured for your project
We're licensed and insured. A saw working close to your foundation, your walls or your neighbor's fence is exactly the kind of job where that should be settled before anyone starts.
Based in Castro Valley, working nearby
We're based in Castro Valley and work across the cities around it, from Oakland and San Leandro down to Union City and out to Dublin, San Ramon and Pleasanton. Much of what we cut around here is older driveway and patio concrete that has cracked or sunk and needs a section taken out.
On a cut job, what matters most is knowing exactly what gets cut and what leaves your property. Tell us what you're cutting, where it sits and whether you want it hauled off, either through the contact form or by calling (510) 264-7164.
Get a free estimate for your concrete cut
Send the form and we'll get back to you within one business day to set up a visit. I'll look at the concrete on site and give you a free estimate, with no obligation to book.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
What happens after you call about concrete cutting?
Tell us about the cut
Call or send the form with what you're cutting, where it sits and whether you want the pieces hauled off. We'll set a time for me to come look.
I walk the job
I look at the slab or wall, ask how you'll use the space afterward and check how we can get a saw to it. The estimate spells out what's included, so you can see whether it covers sawing only or breaking and hauling too.
We book it and handle permits
Once you say yes, I put the job on the schedule and sort out any permit steps. When a job needs a permit, we handle the application and set up the inspections.
Our crew lead runs the work
Our crew lead runs the cut with our own crew through cleanup. California requires crews cutting, coring or drilling concrete with power tools to use a dust reduction system, which keeps the dust down around your house.
Concrete cutting questions
How much does concrete cutting cost in Castro Valley?
A national price guide puts professional slab saw cutting across the US at about $4 to $15 per linear foot, and that covers the sawing alone. Reinforced or deeper slabs and wall sawing run higher per foot than an easy-to-reach slab. The estimate I write after walking your job gives your actual price.
Does a concrete cutting quote include hauling the concrete away?
Not always. Some cutters make the cuts and leave the pieces where they lie. Breaking, hauling and disposal can add more than the sawing itself, so check what each quote covers before you compare prices.
Who issues permits for concrete work in Castro Valley?
Alameda County issues building permits for Castro Valley. County Public Works issues encroachment permits for work in county roads, sidewalks and other public rights-of-way. We check with the county early on every job, and when a permit is needed, we take care of it.
What license covers concrete sawing in California?
California's D-6 Concrete-Related Services classification covers concrete sawing, breaking and coring work. You can look up what a classification covers through the state licensing board. Ask any cutter what license they hold before work starts.
How do I get a hole cut in a concrete slab for a drain pipe?
A round hole for a pipe, drain or conduit is usually core drilled, which means a hollow bit cuts out a clean circle instead of a saw making straight lines. Holes are normally priced differently from ordinary saw cuts, so ask how each quote prices them.
How long before digging do I need to call 811 in Castro Valley?
If the job includes digging, contact USA North 811 at least two working days before you dig, not counting the day you call, and no more than 14 calendar days ahead. It serves Alameda County around the clock, online or by dialing 811, and it gets buried lines marked before anyone digs.
Work that often follows concrete cutting
Concrete driveway building
Cutting out a cracked or sunken section is often step one, and a new driveway poured on a packed base is what goes back in.
Concrete patio construction
When a patio needs a drain line run through it or an old section removed, the cut leaves clean edges for new concrete to tie into.